Skip to content
US support +1 (786) 807-2239 · Every day 9 AM–4 PM ET support@otusworld.com

Support and manuals

US phone

+1 (786) 807-2239

Every day 9:00 AM–4:00 PM Eastern (6:00 AM–1:00 PM Pacific)

Email

support@otusworld.com

Manuals

Tall Architect Lamp, gesture control (DL-001) PDF Architect Lamp with Wireless Charger (DL-006) PDF Clip-On Dual Light Bar (DL-1807) PDF

Monitor Lamp with Motion Sensor (DL-1332): see the quick fixes below, or call us.

Quick fixes

  • DL-001 won’t switch on

    Wave a hand 1–4 in above the shade, not higher. If that does not work, hold the color key for 1 second.

  • DL-001 forgot my brightness

    Settings are kept when you switch off, and reset when the lamp is unplugged.

  • DL-006 phone not charging

    Use a Qi-compatible phone or earbuds. The charger works up to 7 mm from the pad, so take off a thick case.

  • DL-1332 knob

    Turn to set brightness. Press and turn to set color temperature. Double-press to switch the motion sensor on or off; a red light shows it is active.

  • DL-1332 switched itself off

    With the motion sensor on, the lamp turns off about 10 minutes after you leave the desk.

  • DL-1807 battery

    Charge over USB-C for about 2.5 hours; the red light goes off when it is full. You can keep using the lamp while it charges.

Warranty

Every OTUS lamp has an 18-month warranty. Register it with your Amazon order number and we extend it by another 18 months.

Register your lamp